AWE Direct

AWE Instruments

Replacement pH Probe PS183-20B

replacement ph probe model PS183-20b

The PS183-20B is a replacement pH Probe designed to work with our PS90S Dip pH Electrode system. The probe has a 3/4" BSP mounting thread and is designed with an electrode guard to prevent the glass bulb being compromised from mechanical damage, it has a very fast response time using a free flowing annular ceramic junction. With the 3/4" BSP thread can be easily removed from the dip pH electrode system for calibration or service. 

Please note - the PS183-20B formerly carried model number PS183-750-20B; but is now referred to the more straight forward PS183-20B. 

Replacement pH Probe model PS183-20B.

The PS183-20B replacement pH probe is a combination pH probe in rugged industrial housing manufactured in PVC. The probe has the 3/4" BSP thread at the base so it can easily be screwed into one of our dip assemblies - most commonly the PS90S Submersible pH electrode system. The PS183-20B construction includes an electrode guard to prevent mechanical damage to the glass bulb while still allowing excellent contact with the solution to be measured. The PS183-20B has a non-fouling annular ceramic junction for excellent response time for excellent continual pH measurement in industrial applications.

The PS183-20B is designed as a replacement pH Probe insert for use with the PS90S dip pH electrode assembly. This is designed for mounting in open tanks, pits, sumps or any other unpressurised vessel. These are commonly mounted within tanks that have dosing pumps, industrial mixers or agitators mounted into them. We would recommend that where an industrial mixer or agitator is present - that the liquid to be monitored is reasonably clear of solids or particulates that may damage the glass. In instances where particulate matter is present - we would suggest using our replacement tuff tip pH probe model PTT183-20B.

Replacement pH Probe Model PS183-20B Features & Benefits.

The PS183-20B replacement pH probe non-fouling annular reference junction is a sealed pH probe for use with a PS90S dip pH electrode system for submersion in industrial applications that use unpressurised vessels. The pH probe has a built in electrode guard to resist against mechanical damage. These probes are frequently mounted in tanks where agitators or industrial mixers are present. This pH electrode is designed for rugged applications and gives precision measurements across the 0 - 13pH range and is suitable for a temperature range of 0 - 50°C.

The PS183-20B is supplied with 20 feet of connecting cable as standard and a BNC plug for easy connection to our pH instrument range.

Replacement pH Probe Model PS183-20B Connection Types and cable length.

The PS183-20B replacement pH probe is available with a number of connection types; as standard we supply the PS183-20B with 6 metres of connecting cable and a BNC fitting.

For custom fitting types please see the below table for the ordering number and options:-

PS183 - XX - Z

Replacement pH Probe Model Number.

 

Cable Length

10 = 3 Metres

20 = 6 Metres

30 = 9 Metres

 

Connection Type

B = BNC Connector (Most Common)

T = Stripped & Tinned Connections

S8 = S8 Connector (No Cable)

A = U.S. Standard Connector fitted to older U.S. pH Instruments

I = Din 19262 Connector for German pH Instruments

K = Belling Lee Connector for older UK pH Instruments

More information on pH electrode connection types

The PS183-20B Rugged pH Electrode maybe used as a replacement for many other manufacturers electrodes, often outperforming the original electrodes. 

Replacement pH Probe PS183-20B In Summary

Range pH: 0 - 13 pH

Operating Temperature: 0 - 50°C

Response Time: Excellent

Electrode Type: Combination submersion type pH probe with 3/4" BSP thread.

Reference Type: Isolated Silver - Silver Chloride.

Junction Type: Annular Ceramic Non Fouling Type.

Fittings: Base mounted 3/4" BSP thread.

Model Numbers Available Ex-Stock:

PS183-20B - Replacement pH Probe with 6 metres connecting cable & BNC fitting.

PS183-20T - Replacement pH probe with 6 metres connecting cable & stripped and tinned connections.

Ordering: Please Specify model using PS183 and then the naming convention defined in the above table for cable and connection type.

pH Electrodes Data Sheet

pH Probes Data Sheet

Rugged pH Electrode Model 9060-10B with Tuff Tip Robust pH bulb

Rugged pH Electrode Model 9060-10B

The 9060-10B Rugged pH Electrode is designed for use in tough conditions where a standard glass pH electrode may break. The pH bulb and magna-flow reference junction make this an ideal robust pH electrode where breakage can be a problem.

Rugged pH Electrode Model 9060-10B Introduction

The 9060-10B Rugged pH Electrode combines a rugged pH Bulb with the tuff-tip sensor shape to give a robust pH electrode. The 9060-10B is an epoxy bodied, sealed combination pH electrode with rugged pH bulb and magna-flow reference junction. The magna-flow reference junction is non-fouling and the recessed rugged pH bulb is designed not to break in tough conditions. 

The 9060-10B gives a quick response time, precision measurement and offers excellent repeatability. 

The 9060-10B is designed to be a robust pH Electrode where electrode breakage is a problem.

Rugged pH Electrode Model 9060-10B Features & Benefits.

The 9060-10B rugged pH electrode with sealed combination non-fouling magna-flow reference junction is suitable for tough laboratory or industrial applications. This pH electrode is designed for rugged applications and gives precision measurements across the 0 - 14pH range and is suitable for a temperature range of 0 - 100°C,

For tougher laboratory applications the electrode is easily paired with one of our portable pH meters and the 9060-10B pH electrode is widely used with our pH controller range in inline applications.

The mounting cap on the rugged pH Electrode model 9060-10B is Ryton with a small flange for mounting the pH electrode into our PES style holders.

Rugged pH Electrode Model 9060-10B Connection Types and cable length.

The 9060-10B pH electrode is available with a number of connection types; as standard we supply the 9060-10B with 3 metres of connecting cable and a BNC fitting.

For custom fitting types please see the below table for the ordering number and options:-

9060 - XX - Z

Rugged pH Electrode Model Number.

Cable Length

10 = 3 Metres

20 = 6 Metres

30 = 9 Metres

Connection Type

B = BNC Connector (Most Common)

T = Stripped & Tinned Connections

S8 = S8 Connector (No Cable)

A = U.S. Standard Connector fitted to older U.S. pH Instruments

I = Din 19262 Connector for German pH Instruments

K = Belling Lee Connector for older U.K. pH Instruments

More information on pH electrode connection types

The 9060-10B Rugged pH Electrode maybe used as a replacement for many other manufacturers electrodes, often outperforming the original electrodes. 

Rugged pH Electrode 9060-10B In Summary

Range pH: 0 - 13 pH

Operating Temperature: 0 - 100°C

Response Time: Fast.

Electrode Type: Sealed Combination Rugged pH electrode.

Reference Type: Isolated Silver - Silver Chloride

Junction Type: Annular Polymer Magna-Flow Non Fouling Type.

Dimensions: 110mm Long  x 12mm ∅

Model Numbers Available Ex-Stock:

9060-10B - Rugged pH Electrode with 3 metres connecting cable & BNC fitting.

9060-10T - Rugged pH Electrode with 3 metres connecting cable & stripped and tinned connections.

Ordering: Please Specify model using 9060 and then the naming convention defined in the above table for cable and connection type.

pH Electrodes Data Sheet

pH Electrodes Data Sheet

 

Glass pH Electrode Model 9069-10B

Glass pH Electrode Model 9069-10B

Our 9069-10B Glass pH Electrode is our top selling glass pH electrode.

Glass pH Electrode Model 9069-10B Introduction

The 9069-10B is a general purpose glass bodied sealed combination pH electrode designed for laboratory and light industrial use. The pH electrode is constructed in glass allowing us to use a non fouling annular ceramic reference junction which offers a fast response time and stable reading. 

Glass pH Electrode Model 9069-10B Features & Benefits.

The 9069-10B general purpose glass pH electrode is can be used with our range of portable pH meters and more commonly with our pH controller range in inline fittings for light industrial applications. The 9069-10B is a sealed combination glass pH electrode with low impedance glass bulb, single perhipheric annular ceramic reference junction and a silver - silver chloride element.

The mounting cap on the Glass pH Electrode model 9069-10B is Ryton with a small flange for mounting the pH electrode into our PES style holders.

Glass pH Electrode Model 9069-10B Connection Types and cable length.

The 9069-10B pH electrode is available with a number of connection types; as standard we supply the 9069-10B with 3 metres of connecting cable and a BNC fitting.

For custom fitting types please see the below table for the ordering number and options:-

9069 - XX - Z

Glass pH Electrode Model Number.

Cable Length

10 = 3 Metres

20 = 6 Metres

30 = 9 Metres

Connection Type

B = BNC Connector (Most Common)

T = Stripped & Tinned Connections

S8 = S8 Connector (No Cable)

A = U.S. Standard Connector fitted to older U.S. pH Instruments

I = Din 19262 Connector for German pH Instruments

K = Belling Lee Connector for older U.K. pH Instruments

More information on pH electrode connection types

The 9069-10B Glass pH Electrode maybe used as a replacement for many other manufacturers electrodes, often outperforming the original electrodes. 

pH Electrode 9069-10B In Summary

Range pH:0 - 13 pH

Operating Temperature: 0 - 60°C

Response Time: Fast.

Electrode Type: Glass Combined pH electrode.

Reference Type: Silver - Silver Chloride

Junction Type: Peripheric Annular Ceramic Type.

Dimensions: 110mm Long  x 12mm ∅

Model Numbers Available Ex-Stock:

9069-10B - Glass pH Electrode with 3 metres connecting cable & BNC fitting.

9069-10T - Glass pH Electrode with 3 metres connecting cable & stripped and tinned connections.

9069-S8 - Glass pH Electrode with S8 Connector. 

Ordering: Please Specify model using 9069 and then the naming convention defined in the above table for cable and connection type.

pH Electrodes Data Sheet

pH Electrodes Data Sheet

 

Budget pH Electrode Model 9015-10B

Budget pH electrode model 9015-10B

Our 9015-10B Budget pH Electrode is manufactured in Epoxy. 

 

Budget pH Electrode Model 9015-10B Introduction

The 9015-10B is a general purpose epoxy bodied sealed combination pH electrode designed for portable and light industrial use. By using constructing the pH electrode body in epoxy we have managed to bring the cost down to make a low budget pH electrode while still enabling precision pH readings. This electrode offers a fast response time and a stable reading.

 

Budget pH Electrode Model 9015-10B Features & Benefits.

The 9015-10B general purpose budget pH electrode is designed for use with portable pH meters or in light industrial applications. The 9015-10B is a sealed combination budget pH electrode and has a low impedance glass bulb, single junction reference and a silver - silver chloride element.

The mounting cap on the budget pH Electrode model 9015-10B is Ryton with a small flange for mounting the pH electrode into our PES style holders.

 

Budget pH Electrode Model 9015-10B Connection Types and cable length.

The 9015-10B pH electrode is available with a number of connection types; as standard we supply the 9015-10B with 3 metres of connecting cable and a BNC fitting.

For custom fitting types please see the below table for the ordering number and options:-

 

9015 - XX - Z

Budget pH Electrode Model Number.

Cable Length

10 = 3 Metres

20 = 6 Metres

30 = 9 Metres

Connection Type

B = BNC Connector (Most Common)

T = Stripped & Tinned Connections

S8 = S8 Connector (No Cable)

A = U.S. Standard Connector fitted to older U.S. pH Instruments

I = Din 19262 Connector for German pH Instruments

K = Belling Lee Connector for older U.K. pH Instruments

More information on pH electrode connection types

The 9015-10B Budget pH Electrode maybe used as a replacement for many other manufacturers electrodes, often outperforming the original pH electrode

Budget pH Electrode 9015-10B In Summary

Range pH: 0 - 13 pH.

Operating Temperature: 0 - 60°C

Response Time: Fast.

Electrode Type: Budget Combined pH electrode.

Reference Type: Silver - Silver Chloride

Dimensions: 110mm Long  x 12mm ∅

Model Numbers Available Ex-Stock:

9015-10B - Budget pH Electrode with 3 metres connecting cable & BNC fitting.

9015-10T - Budget pH Electrode with 3 metres connecting cable & stripped and tinned connections.

9015-S8 - Budget pH Electrode with S8 Connector

Ordering: Please Specify model using 9015 and then the naming convention defined in the above table for cable and connection type.

pH Electrodes Data Sheet

pH Electrodes Data Sheet

spacer

socialmedia_01socialmedia_02socialmedia_03

socialmedia_04socialmedia_05socialmedia_06

AWE Direct News:- New Teflon Junction pH Electrodes and Redox Electrodes

We are now able to supply our P8000-10B series high performance combination pH electrodes with a porous teflon liquid junction, and our R8000-10B series of high performance combination redox electrodes with a porous liquid junction.

The new range of P8000 pH Electrodes and R8000 Redox Electrodes are ideal for solutions which are incompatible with ceramic. Some chemical blends involving strong acids or strong alkali solutions can slowly dissolve the ceramic junction. Other substances can block the ceramic junction such as biological effluents which contain fats, oils or greases. 

The P8000-10B porous teflon liquid junction pH electrodes and R8000-10B high performance liquid teflon junction redox electrodes aim to eliminate these concerns. 

More about our P8000-10B High Performance pH Electrodes and R8000-10B High Performance Redox Electrodes