Tel. 01785 254597
The PC18-K Portable Redox / pH / µS / oC combination meter kit comprises of a calculator sized portable pH / µS / oC redox meter with digital display which displays one of the following either pH range 0 - 14.00 pH, Conductivity ranges selectable for 0 – 199.9 µS, 0 – 1999 µS or 0 – 19.99 mS temperature range -50 to 150oC.The PC18-K Portable Redox / pH / µS / oC combination meter kit is supplied with a 9015-3B plastic bodied combination pH electrode with a 3’ connecting cable and a BNC connector. For temperature readout and auto temperature compensation on the pH range the PC18-K Portable Redox / pH / µS / oC combination meter kit is supplied complete with part number A8000 stainless steel temperature sensor. For conductivity measurements with the PC18-K Portable Redox / pH / µS / oC combination meter kit is supplied with part number A1003 which is a special compact black epoxy conductivity cell with graphite electrodes and its own auto temperature sensor which provides ATC back to a base of 25oC at 2% / oC. The PC18-K Portable Redox / pH / µS / oC combination meter kit meter kit has many uses which include testing of boiler and cooling waters, demin and distilled water conductivity checking. Plating shop rinse water testing to help reduce water usage along with much other industrial water treatment applications.PC18 Portable Combination meter selectable for Redox, pH, oC and Conductivity. Ranges pH 0 - 14.00, temperature -50 to +150oC. and conductivity 0 - 200 µS, 0 - 2000 µS or 0 - 20.00 mS. with auto temp comp to a base of 25oC at 2% / oCSupplied with 9005 - 3B epoxy bodied pH electrode, conductivity cell A1003 k = 1.0 with ATC, and A8000 stainless steel temperature sensor.
The PC15-K Portable Redox pH /oC meter kit comprises of a calculator sized portable Redox / pH /oC meter with digital display which displays one of the following ranges 0 - 14.00 pH, 0 - 1999 mV or -50 to 150oC.The PC15-K Portable pH / Redox /oC meter kit is supplied with a 9015-3B plastic bodied combination Redox electrode with a 3’ connecting cable and a BNC connector. For temperature readout and auto temperature compensation on the redox range the PC15-K Portable redox / pH /oC meter is supplied complete with part number A8000 stainless steel temperature sensor. For Redox (ORP) measurements with the PC15-K Portable Redox / pH /oC meter kit we are able to offer a range of platinum combination electrode suitable for use.The PC15-K Portable Redox / pH /oC meter kit has many uses offering increased accuracy and repeatability over Redox or pH indicator solutions and papers. Uses include educational field studies, laboratories, environmental monitoring to simply testing the redox of verily any water based solution.
PC15-K Portable Redox / mV /oC meter kit with digital display 0 - 14.00 pH, Redox 0 - 1999 mV or -50 to 150oC. Fitted with automatic temperature compensation on the Redox range. Supplied with 9005 - 3B epoxy bodied Redox electrode, stainless steel temperature sensor and carrying case.
PC18 Portable Combination meter selectable for Redox, oC. and Conductivity. Ranges Redox 0 - 14.00, temperature -50 to +150oC. and conductivity 0 - 200 µS, 0 - 2000 µS or 0 - 20.00 mS. with auto temp comp to a base of 25oC at 2% / oCSupplied with 9005 - 3B epoxy bodied Redox electrode, conductivity cell A1003 k = 1.0 with ATC, and A8000 stainless steel temperature sensor.
The Redox Transmitter is instruments for mounting close say within 3 metres (10’) of the Redox electrode system. The best Redox transmitters have a display and calibration controls for zero and span so the system maybe calibrated or buffered local to the electrode.Effluent Ltd. The current output is an industry standard 4 – 20 mA output with the same two wire which power the 24 VDC transmitter carrying the current output.
Redox Controllers are Redox instruments which has the ability to operate a remote device the output can either by a relay which switches at a preset Redox value or an analog control signal. The analog control signal must not be confused with a recorder output, which is a linear output corresponding to the measuring range of the instrument and should not be used for control.
A good quality electrode is the secret to any Redox measurement application Automated water & Effluent Ltd (AWE Direct) carry a wide range of electrodes for many applications in water and waste water treatment. Our range includes dip electrodes for immersion into open tanks pits and sumps, insertion electrodes where the electrode becomes part of the pipework and inline electrodes where the solution flows through an electrode holder.
The APS2 Redox & mV simulator is a source of precise mV signals for calibrating Redox and mV meters. It is substituted for the service electrode and maybe also be used to check the serviceability of extension cables and of wiring within the meters themselves.
Redox Buffers calibrating a Redox electrode and instrument is often referred to as buffering the system. The electrode is removed cleaned and immersed in a solution of a know Redox value and the instrument is set to read this value. This is usually carried out for 2 values so the zero and span can be accurately set. Automated water & Effluent Ltd (AWE Direct) offer buffers in values of 4.00, 7.00, 9.00 and 10.00 Redox either as liquid or powder to mix your own buffer solution.
We are now able to supply our P8000-10B series high performance combination pH electrodes with a porous teflon liquid junction, and our R8000-10B series of high performance combination redox electrodes with a porous liquid junction.
The new range of P8000 pH Electrodes and R8000 Redox Electrodes are ideal for solutions which are incompatible with ceramic. Some chemical blends involving strong acids or strong alkali solutions can slowly dissolve the ceramic junction. Other substances can block the ceramic junction such as biological effluents which contain fats, oils or greases.
The P8000-10B porous teflon liquid junction pH electrodes and R8000-10B high performance liquid teflon junction redox electrodes aim to eliminate these concerns.
More about our P8000-10B High Performance pH Electrodes and R8000-10B High Performance Redox Electrodes