AWE Direct

AWE Instruments

9000

9015 General purpose epoxy bodied sealed combination pH electrode for portable and light industrial use. Low impedance glass bulb, single junction reference, with silver-silver chloride element. Temperature range 0 - 60oC pH range 0 - 13 pH.

9069 General purpose sealed combination pH electrode for laboratory or light industrial applications.. Standard glass bulb, sealed single junction reference, with silversilver chloride element. Temperature range 0 - 60oC pH range 0 - 13 pH.

9093 Sealed combination pH electrode for industrial applications. Features standard glass bulb and sealed single peripheric non-fouling annular reference junction with silver-silver chloride reference element. Temperature range 0 - 100oC pH range 0 - 13 pH.

9092 pH electrode for laboratory or industrial applications. Standard glass bulb and sealed double junction reference junction. For use where organic compounds react with silver. Temperature range 0 - 100oC pH range 0 - 13 pH.

9072 Special low impedance electrode for low conductivity water, features peripheric non-fouling annular double junction reference pH range 0 -11 pH temperature range 0-50oC.

9044 pH Electrode for high temperature industrial applications. Domed glass bulb and sealed double junction non-fouling annular reference. High temperature gel filling, temperature range 0 - 120oC pH range 0 - 13 pH.

9037 pH Electrode for high pH industrial applications with minimal sodium ion error above 13 pH. Domed glass bulb and sealed double junction gel filled reference. For use where organic compounds react with silver. Temperature range 0 - 100oC, pH range 2 - 14 pH.

9393 Long body sealed combination pH electrode for use in the Lock & Load retractable electrode system. Features standard glass bulb and sealed single junction reference element. Temperature range 0 - 100oC pH range 0 - 13 pH.

9392 Long sealed combination pH electrode with double junction for use in the Lock & Load electrode system. Specification as 9092

9027 Inline pH electrodes for mounting into standard 1/2” or 3/4” pipe tees for continuous pH measurements. Sealed gel filled reference junction with annular ground glass sleeve type junction. Temperature range 0 - 100oC pH range 0 -13 pH.

spacer

socialmedia_01socialmedia_02socialmedia_03

socialmedia_04socialmedia_05socialmedia_06

pH Transmitter Range

Within our pH Transmitter range we offer the P3630 pH Transmitter. This instrument is one of our top selling instruments and offers an excellent way of transmitting a pH signal to a PLC or other device. 

The unit is normally located within close proximity to a pH electrode giving the operator a visual indication of the current pH output. The pH Transmitter then transmits the pH value using a 4-20mA (or 0 - 20mA) current signal to a PLC or Chart Recorder which can be located up to 1000 metres away. The same 2 wires which transmit the pH signal as a 4-20mA current signal are also used to power the pH transmitter. This "loop powered" system ensures an efficient transfer of the signal and means that the pH transmitter can be housed in either a small din rail mounting enclosure or as a surface mounted pH transmitter system.