AWE Direct

AWE Instruments

9000

9015 General purpose epoxy bodied sealed combination pH electrode for portable and light industrial use. Low impedance glass bulb, single junction reference, with silver-silver chloride element. Temperature range 0 - 60oC pH range 0 - 13 pH.

9069 General purpose sealed combination pH electrode for laboratory or light industrial applications.. Standard glass bulb, sealed single junction reference, with silversilver chloride element. Temperature range 0 - 60oC pH range 0 - 13 pH.

9093 Sealed combination pH electrode for industrial applications. Features standard glass bulb and sealed single peripheric non-fouling annular reference junction with silver-silver chloride reference element. Temperature range 0 - 100oC pH range 0 - 13 pH.

9092 pH electrode for laboratory or industrial applications. Standard glass bulb and sealed double junction reference junction. For use where organic compounds react with silver. Temperature range 0 - 100oC pH range 0 - 13 pH.

9072 Special low impedance electrode for low conductivity water, features peripheric non-fouling annular double junction reference pH range 0 -11 pH temperature range 0-50oC.

9044 pH Electrode for high temperature industrial applications. Domed glass bulb and sealed double junction non-fouling annular reference. High temperature gel filling, temperature range 0 - 120oC pH range 0 - 13 pH.

9037 pH Electrode for high pH industrial applications with minimal sodium ion error above 13 pH. Domed glass bulb and sealed double junction gel filled reference. For use where organic compounds react with silver. Temperature range 0 - 100oC, pH range 2 - 14 pH.

9393 Long body sealed combination pH electrode for use in the Lock & Load retractable electrode system. Features standard glass bulb and sealed single junction reference element. Temperature range 0 - 100oC pH range 0 - 13 pH.

9392 Long sealed combination pH electrode with double junction for use in the Lock & Load electrode system. Specification as 9092

9027 Inline pH electrodes for mounting into standard 1/2” or 3/4” pipe tees for continuous pH measurements. Sealed gel filled reference junction with annular ground glass sleeve type junction. Temperature range 0 - 100oC pH range 0 -13 pH.

spacer

socialmedia_01socialmedia_02socialmedia_03

socialmedia_04socialmedia_05socialmedia_06

pHTestr 10 Calibration

 

The waterproof pH Tester model:- pHTestr10 has a simple push button 3 point calibration mode. This reduces the time needed to buffer the unit to allow for the quick measurement of pH values. By using the a 3 point calibration the pHTestr 10 offers precision readings across the logarithmic pH scale while also being housed in an IP67 Rated Waterproof enclosure. 

The calibration process is simple using pHBS4, pHBS7 and pHBS10 from our pH buffer solution range to give a representative sample across the pH scale. 

Having rinsed the instrument in water (not de-ionised water) simply insert the pHTestr10 into the first buffer solution, turn the unit on and hold the calibration button down. The instrument will identify which buffer solution, adjust it's internal value accordingly, also give you the previous reading for when the unit was last calibrated. Rinse the electrode again in water and repeat the process for the remaining buffer solutions. 

pHTestr 10 Accessories

Accessories for the pHTestr10 and items also purchased by AWE Direct customers.

 

Model:- pHWPSEN

Replacement Electrode For pHTesr10

The pHWPSEN is the Replacement electrode for the pHTestr10. The pHWPSEN comprises of a double junction pH Electrode with built in Automatic Temperature Compensation. 


To replace the electrode in the pHTestr10, the old electrode simply twists off the unit and the replacement pH electrode slots into place and the holding collar is tightened to secure it.