AWE Direct

AWE Instruments


P8027 Sealed pH electrode in PVDF housing with annular ceramic reference junction mounting 3/4'' BSP. thread 0 - 100oC pH range 0 - 13 pH.

P8000 Sealed DJ pH electrode in PVDF housing with ceramic reference junction mounting 3/4'' BSP. thread pH range 0 - 13 pH

P8000T/TC Sealed DJ pH electrode in PVDF housing with porous teflon reference junction mounting 3/4'' BSP. thread pH range 0 - 13 pH.

1627 Flat glass pH electrode with Kynar (PVDF) housing for greater chemical resistance and higher temperature use pH range 0 - 12 pH.

3637 Combination pH electrode with standard glass bulb and sealed double PTFE reference junction. For use where organic compounds react with silver. Temperature range 0 - 100oC pH range 0 - 13




pHTestr 10 Calibration


The waterproof pH Tester model:- pHTestr10 has a simple push button 3 point calibration mode. This reduces the time needed to buffer the unit to allow for the quick measurement of pH values. By using the a 3 point calibration the pHTestr 10 offers precision readings across the logarithmic pH scale while also being housed in an IP67 Rated Waterproof enclosure. 

The calibration process is simple using pHBS4, pHBS7 and pHBS10 from our pH buffer solution range to give a representative sample across the pH scale. 

Having rinsed the instrument in water (not de-ionised water) simply insert the pHTestr10 into the first buffer solution, turn the unit on and hold the calibration button down. The instrument will identify which buffer solution, adjust it's internal value accordingly, also give you the previous reading for when the unit was last calibrated. Rinse the electrode again in water and repeat the process for the remaining buffer solutions. 

pHTestr 10 Accessories

Accessories for the pHTestr10 and items also purchased by AWE Direct customers.


Model:- pHWPSEN

Replacement Electrode For pHTesr10

The pHWPSEN is the Replacement electrode for the pHTestr10. The pHWPSEN comprises of a double junction pH Electrode with built in Automatic Temperature Compensation. 

To replace the electrode in the pHTestr10, the old electrode simply twists off the unit and the replacement pH electrode slots into place and the holding collar is tightened to secure it.