Tel. 01785 254597
The PC18-K Portable Redox / pH / µS / oC combination meter kit comprises of a calculator sized portable pH / µS / oC redox meter with digital display which displays one of the following either pH range 0 - 14.00 pH, Conductivity ranges selectable for 0 – 199.9 µS, 0 – 1999 µS or 0 – 19.99 mS temperature range -50 to 150oC.The PC18-K Portable Redox / pH / µS / oC combination meter kit is supplied with a 9015-3B plastic bodied combination pH electrode with a 3’ connecting cable and a BNC connector. For temperature readout and auto temperature compensation on the pH range the PC18-K Portable Redox / pH / µS / oC combination meter kit is supplied complete with part number A8000 stainless steel temperature sensor. For conductivity measurements with the PC18-K Portable Redox / pH / µS / oC combination meter kit is supplied with part number A1003 which is a special compact black epoxy conductivity cell with graphite electrodes and its own auto temperature sensor which provides ATC back to a base of 25oC at 2% / oC. The PC18-K Portable Redox / pH / µS / oC combination meter kit meter kit has many uses which include testing of boiler and cooling waters, demin and distilled water conductivity checking. Plating shop rinse water testing to help reduce water usage along with much other industrial water treatment applications.PC18 Portable Combination meter selectable for Redox, pH, oC and Conductivity. Ranges pH 0 - 14.00, temperature -50 to +150oC. and conductivity 0 - 200 µS, 0 - 2000 µS or 0 - 20.00 mS. with auto temp comp to a base of 25oC at 2% / oCSupplied with 9005 - 3B epoxy bodied pH electrode, conductivity cell A1003 k = 1.0 with ATC, and A8000 stainless steel temperature sensor.
The PC15-K Portable Redox pH /oC meter kit comprises of a calculator sized portable Redox / pH /oC meter with digital display which displays one of the following ranges 0 - 14.00 pH, 0 - 1999 mV or -50 to 150oC.The PC15-K Portable pH / Redox /oC meter kit is supplied with a 9015-3B plastic bodied combination Redox electrode with a 3’ connecting cable and a BNC connector. For temperature readout and auto temperature compensation on the redox range the PC15-K Portable redox / pH /oC meter is supplied complete with part number A8000 stainless steel temperature sensor. For Redox (ORP) measurements with the PC15-K Portable Redox / pH /oC meter kit we are able to offer a range of platinum combination electrode suitable for use.The PC15-K Portable Redox / pH /oC meter kit has many uses offering increased accuracy and repeatability over Redox or pH indicator solutions and papers. Uses include educational field studies, laboratories, environmental monitoring to simply testing the redox of verily any water based solution.
The Redox Transmitter is instruments for mounting close say within 3 metres (10’) of the Redox electrode system. The best Redox transmitters have a display and calibration controls for zero and span so the system maybe calibrated or buffered local to the electrode.Effluent Ltd. The current output is an industry standard 4 – 20 mA output with the same two wire which power the 24 VDC transmitter carrying the current output.
Redox Controllers are Redox instruments which has the ability to operate a remote device the output can either by a relay which switches at a preset Redox value or an analog control signal. The analog control signal must not be confused with a recorder output, which is a linear output corresponding to the measuring range of the instrument and should not be used for control.
A good quality electrode is the secret to any Redox measurement application Automated water & Effluent Ltd (AWE Direct) carry a wide range of electrodes for many applications in water and waste water treatment. Our range includes dip electrodes for immersion into open tanks pits and sumps, insertion electrodes where the electrode becomes part of the pipework and inline electrodes where the solution flows through an electrode holder.
The APS2 Redox & mV simulator is a source of precise mV signals for calibrating Redox and mV meters. It is substituted for the service electrode and maybe also be used to check the serviceability of extension cables and of wiring within the meters themselves.
Redox Buffers calibrating a Redox electrode and instrument is often referred to as buffering the system. The electrode is removed cleaned and immersed in a solution of a know Redox value and the instrument is set to read this value. This is usually carried out for 2 values so the zero and span can be accurately set. Automated water & Effluent Ltd (AWE Direct) offer buffers in values of 4.00, 7.00, 9.00 and 10.00 Redox either as liquid or powder to mix your own buffer solution.
PC15-K Portable Redox / mV /oC meter kit with digital display 0 - 14.00 pH, Redox 0 - 1999 mV or -50 to 150oC. Fitted with automatic temperature compensation on the Redox range. Supplied with 9005 - 3B epoxy bodied Redox electrode, stainless steel temperature sensor and carrying case.
PC18 Portable Combination meter selectable for Redox, oC. and Conductivity. Ranges Redox 0 - 14.00, temperature -50 to +150oC. and conductivity 0 - 200 µS, 0 - 2000 µS or 0 - 20.00 mS. with auto temp comp to a base of 25oC at 2% / oCSupplied with 9005 - 3B epoxy bodied Redox electrode, conductivity cell A1003 k = 1.0 with ATC, and A8000 stainless steel temperature sensor.
The waterproof pH Tester model:- pHTestr10 has a simple push button 3 point calibration mode. This reduces the time needed to buffer the unit to allow for the quick measurement of pH values. By using the a 3 point calibration the pHTestr 10 offers precision readings across the logarithmic pH scale while also being housed in an IP67 Rated Waterproof enclosure.
The calibration process is simple using pHBS4, pHBS7 and pHBS10 from our pH buffer solution range to give a representative sample across the pH scale.
Having rinsed the instrument in water (not de-ionised water) simply insert the pHTestr10 into the first buffer solution, turn the unit on and hold the calibration button down. The instrument will identify which buffer solution, adjust it's internal value accordingly, also give you the previous reading for when the unit was last calibrated. Rinse the electrode again in water and repeat the process for the remaining buffer solutions.
Accessories for the pHTestr10 and items also purchased by AWE Direct customers.
The pHWPSEN is the Replacement electrode for the pHTestr10. The pHWPSEN comprises of a double junction pH Electrode with built in Automatic Temperature Compensation.
To replace the electrode in the pHTestr10, the old electrode simply twists off the unit and the replacement pH electrode slots into place and the holding collar is tightened to secure it.